Project Description

EtherCAT Analog & Digital IO

Digital IO Board – 1EA : EM1602N0 / 2EA : EM3202N0

Supply Power

  • DC 24V ±10%

Rated Current

  • 300mA (Except for Input and Output Current)

Isolation Voltage

  • 2,500Vrms (Photo Coupler)

Input Channels(Sink)

  • Up to 32 Channels (In case of using two digital IO board)

Output Channels(Sink)

  • Up to 32 Channels (In case of using two digital IO board)
  • 4 Channels on the main board

Analog Input (Voltage Mode)

  • Channels : 2 Channels
  • Input Type : Single Ended
  • Input Range : ±5V or ±10V
  • Resolution : 16bit
  • Filter : ADC 2th Filter

Max Operation Output Current

  • 150mA Per Channel (Attention: Total Current of Output must be less than 2A)

Storage Environment

  • Temperature: -25 ~ 70°C
    Humidity: 5 ~ 95 %RH
    (Only there should be no condensation)

Operation Environment

  • Temperature: 0 ~ 50°C
    Humidity: 35~85 %RH
    (Only there should be no condensation)

Connector Type

  • Power : MCV 1.5/3-GF-3.81, 3Pin(Vendor: Phoenix Contact)
  • EtherCAT : RJ45(IN, OUT)
  • Digital IO : HIF3BA-40PA-2.54DSA, 40Pin(Vendor: Hirose)

Display

  • Green Chip LED per Input Channel
  • Red Chip LED per Output Channel

Equipment Connection

Dimension(W x H x D)

  • 115 x 108.2 x 83.62mm